LDP Configuration Commands 709debugging bgp Syntaxdebugging bgp { all | event | normal | { keepalive | mp-update | open |packet | route-refresh | update } [ receive | send ] [ verbose ] }undo debugging bgp { all | event | normal | keepalive | mp-update | open |packet | route-refresh | update }ViewUser viewParameterall: Enables all types of BGP debugging.event: Enables BGP event debugging.normal: Enables BGP common function debugging.keepalive: Enables BGP Keepalive packet debugging.mp-update: Enables multi-protocol BGP Update packet debugging.open: Enables BGP Open packet debugging.packet: Enables BGP packet debugging.route-refresh: Enables BGP Route-Refresh packet debugging.update: Enables BGP Update packet debugging.receive: Displays receive information.send: Displays send information.verbose: Displays detailed information.DescriptionUse the debugging bgp command to enable BGP debugging.Use the undo debugging bgp command to disable BGP debugging.Caution should be taken in deciding to enable BGP debugging, since debuggingaffects system performance. Remember to disable the debugging when it iscompleted.Example# Enable the debugging on the detailed information about BGP Keepalive packets. debugging bgp keepalive verbosedefault local-preference Syntaxdefault local-preference valueundo default local-preference