674 CHAPTER 38: MBGP M ULTICAST EXTENSION CONFIGURATION COMMANDS[3Com-bgp] ipv4-family multicast[3Com-bgp-af-mul] peer test next-hop-localpeer public-as-only Syntaxpeer group-name public-as-onlyundo peer group-name public-as-onlyViewIPv4 multicast sub-address family viewParametergroup-name: Name of the peer group.DescriptionUse the peer public-as-only command to set to contain only public AS IDs in theMBGP Update message, but not private AS IDs.Use the undo peer public-as-only command to restore the default setting, therouter contains only private AS IDs in the MBGP Update message.By default, the private AS ID is carried when BGP sends MBGP Update message.Generally, MBGP sends MBGP Update message with the AS ID (which can beeither the public AS number or private AS number) contained. To enable someegress routers to ignore the private AS ID when sending MBGP Update message,you can configure not to carry the private AS IDs when sending MBGP Updatemessage.Example# Set not to carry private AS IDs when sending MBGP Update message to peergroup "test". system-viewSystem View: return to User View with Ctrl+Z.[SW8800] bgp 100[3Com-bgp] ipv4-family multicast[3Com-bgp-af-mul] peer test public-as-onlypeer reflect-client Syntaxpeer group-name reflect-clientundo peer group-name reflect-clientViewIPv4 multicast sub-address family viewParametergroup-name: Name of the peer group.