314 CHAPTER 21: AAA AND RADIUS/HWTACACS PROTOCOL CONFIGURATION COMMANDSViewAny viewParameterisp-name: Specifies the ISP domain name, with a character string not exceeding 24characters. The specified ISP domain shall have been created.DescriptionUse the display domain command to view the configuration of a specified ISPdomain or display the summary information of all ISP domains.By default, this command displays the summary information about all the ISPdomains in the system.This command is used to output the configuration of a specified ISP domain ordisplay the summary information of all ISP domains. If an ISP domain is specified,the configuration information will be displayed exactly the same, concerning thecontent and format, as the displayed information of the display domaincommand. The output information can help with ISP domain diagnosis andtroubleshooting.Related command: access-limit, domain, radius scheme, user-template,state, display domain.Example# Display the summary information of all ISP domains of the system. display domain0 Domain = systemState = ActiveScheme = LOCAL Access-limit = DisableVlan-assignment-mode = IntegerDomain User Template:Idle-cut = DisableSelf-service = DisableDefault Domain Name: systemTotal 1 domain(s).1 listed.display local-user Syntaxdisplay local-user [ domain isp-name | idle-cut { enable | disable } |service-type { ftp | lan-access | ppp | ssh | telnet | terminal } | state { active |block } | user-name user-name | vlan vlanid ]ViewAny viewParameterdomain isp-name: Configures to display all the local users in the specified ISPdomain. isp-name specifies the ISP domain name with a character string notexceeding 24 characters. The specified ISP domain shall have been created.idle-cut: Configures to display the local users according to the state of idle-cutfunction. disable means that the user disables the idle-cut function and enable