Protocol-Based VLAN Configuration Commands 85displayvlan-protocol-vlan vlanSyntaxdisplay protocol-vlan vlan { vlan-list | all }ViewAny viewParametervlan-list: Specifies a VLAN list. It is expressed in the form of vlan-list = { vlan-id [ tovlan-id ] }, where the vlan-id after the keyword to must be larger than or equal tothe vlan-id before to.all: Displays the protocol information of all VLANs.DescriptionUse the display protocol-vlan vlan command to view the protocol informationand protocol index configured for a VLAN, to which you can refer when you usethe protocol-based VLAN and add/delete a protocol.Related command: display vlan.Example# Display the protocol information and protocol index configured on the VLAN522. display protocol-vlan vlan 522VLAN ID: 522VLAN Type: Protocol-based VLANIndex Type Value0 at1 ethernetii etype 0x06002 llc dsap 0x1 ssap 0x023 snap etype 0x07004 ipx ethernetii5 ipx llc6 ipx raw7 ipx snapport hybridprotocol-vlan vlanSyntaxport hybrid protocol-vlan vlan vlan-id { vlan-protocol-list | all }undo port hybrid protocol-vlan vlan { vlan-id { vlan-protocol-list | all } | all }ViewEthernet port viewParametervlan-id: ID of the VLAN which a protocol is added to or deleted from.{ vlan-protocol-list | all }: vlan-protocol represents the VLAN protocol list to beadded to or deleted from a certain port, in the form of vlan-protocol-list = {protocol-index [ to protocol-end ] }. protocol-index indicates the initial value ofprotocol index; protocol-end indicates the end value of protocol index.
