PoE PSU Supervision Configuration Commands 893PoE PSU SupervisionConfigurationCommandspoe-power input-threshlowerSyntaxpoe-power input-thresh lower stringViewSystem viewParameterstring: Undervoltage alarm threshold. It ranges from 90.00 V to 264.00 V in theformat of X.X and within the accuracy of the second decimal.DescriptionUse the poe-power input-thresh lower command to set the undervoltage alarmthreshold of AC input for the PoE PSUs (lower threshold):■ For 220 VAC input, it is recommended to set the threshold to 181.0 V.■ For 110 VAC input, it is recommended to set the threshold to 90.0 V.Example# Set the undervoltage alarm threshold of AC input to 181.0 V.[SW8800] poe-power input-thresh lower 181.0Set lower input-threshold power successfully!poe-power input-threshupperSyntaxpoe-power input-thresh upper stringViewSystem viewParameterstring: Overvoltage alarm threshold. It ranges from 90 V to 264 V in the format ofX.X.DescriptionUse the poe-power input-thresh upper command to set overvoltage alarmthreshold of AC input (upper threshold):■ For 220 VAC input, it is recommended to set the threshold to 264.0 V.■ For 110 VAC input, it is recommended to set the threshold to 132.0 V.Example# Set the overvoltage alarm threshold of AC input to 264.0 V.[SW8800] poe-power input upper 264.0Set upper input-threshold power successfully!