1-2ParametersNoneDescriptionUse the display voice vlan oui command to display the organizationally unique identifier (OUI) listused for identifying voice traffic.The output of the command displays the OUI addresses, their masks, and descriptions.By default, there are five pre-defined OUI addresses in the system. You can use the voice vlanmac-address command to add, modify, or remove OUI addresses.Examples# Display the OUI list for the voice VLAN. display voice vlan ouiOui Address Mask Description0003-6b00-0000 ffff-ff00-0000 Cisco phone000f-e200-0000 ffff-ff00-0000 H3C Aolynk phone00d0-1e00-0000 ffff-ff00-0000 Pingtel phone00e0-7500-0000 ffff-ff00-0000 Polycom phone00e0-bb00-0000 ffff-ff00-0000 3Com phonedisplay voice vlan statusSyntaxdisplay voice vlan statusViewAny viewParametersNoneDescriptionUse the display voice vlan status command to display voice VLAN-related information.The output of the command displays information such as the voice VLAN security mode and voiceVLAN assignment mode (manual or automatic).Related commands: voice vlan, voice vlan enable.Examples# Display the information about the voice VLAN. display voice vlan statusVoice Vlan status: ENABLEVoice Vlan ID: 2Voice Vlan security mode: SecurityVoice Vlan aging time: 100 minutesCurrent voice vlan enabled port mode:
