1-2Configuration: Transmit Period 30 s, Handshake Period 15 sReAuth Period 3600 s, ReAuth MaxTimes 2Quiet Period 60 s, Quiet Period Timer is disabledSupp Timeout 30 s, Server Timeout 100 sInterval between version requests is 30sMaximal request times for version information is 3The maximal retransmitting times 2EAD Quick Deploy configuration:Url: http: //192.168.19.23Free-ip: 192.168.19.0 255.255.255.0Acl-timeout: 30 mTotal maximum 802.1x user resource number is 1024Total current used 802.1x resource number is 1Ethernet1/0/1 is link-up802.1X protocol is enabledProxy trap checker is disabledProxy logoff checker is disabledVersion-Check is disabledThe port is an authenticatorAuthentication Mode is AutoPort Control Type is Port-basedReAuthenticate is disabledMax number of on-line users is 256Authentication Success: 4, Failed: 2EAPOL Packets: Tx 7991, Rx 14Sent EAP Request/Identity Packets : 7981EAP Request/Challenge Packets: 0Received EAPOL Start Packets : 5EAPOL LogOff Packets: 1EAP Response/Identity Packets : 4EAP Response/Challenge Packets: 4Error Packets: 01. Authenticated user : MAC address: 000d-88f6-44c1Controlled User(s) amount to 1Ethernet1/0/2……Table 1-1 Description on the fields of the display dot1x commandField DescriptionEquipment 802.1X protocol is enabled 802.1x protocol (802.1x for short) is enabled onthe switch.CHAP authentication is enabled CHAP authentication is enabled.
