1-8ParametersNoneDescriptionUse the info-center enable command to enable the information center.Use the undo info-center enable command to disable the information center.The switch can output system information to the log host, the console, and other destinations only whenthe information center is enabled.By default, the information center is enabled.Related commands: display info-center, info-center loghost, info-center logbuffer, info-centerconsole channel, info-center monitor channel, info-center trapbuffer, info-center snmpchannel.Examples# Enable the information center. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] info-center enable% Information center is enabledinfo-center logbufferSyntaxinfo-center logbuffer [ channel { channel-number | channel-name } | size buffersize ]*undo info-center logbuffer [ channel | size ]ViewSystem viewParameterschannel: Sets the channel through which information outputs to the log buffer.channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of thesystem.channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in turn) console,monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9.size buffersize: Specifies the size of the log buffer (number of messages the buffer holds) you want todisplay. The buffersize argument ranges from 0 to 1,024 and defaults to 512.DescriptionUse the info-center logbuffer command to enable information output to the log buffer.Use the undo info-center logbuffer command to disable information output to the log buffer.By default, information output to the log buffer is enabled with channel 4 (logbuffer) as the defaultchannel and a maximum buffer size of 512.This command works only when the information center is enabled.
