1-9Parametersoffline-detect-value: Offline detect timer (in seconds) setting. This argument ranges from 1 to 65,535and defaults to 300. The offline detect timer sets the time interval for a switch to test whether a usergoes offline.quiet-value: Quiet timer (in seconds) setting. This argument ranges from 1 to 3,600 and defaults to 60.After a user fails to pass the authentication performed by a switch, the switch quiets for a specific period(the quiet period) before it authenticates the user again.server-timeout-value: Server timeout timer setting (in seconds). This argument ranges from 1 to 65,535and defaults to 100. During authentication, the switch prohibits a user from accessing the network if theconnection between the switch and the RADIUS server times out.DescriptionUse the mac-authentication timer command to configure the timers used in MAC addressauthentication.Use the undo mac-authentication timer command to restore a timer to its default setting.Related commands: display mac-authentication.Examples# Set the server timeout timer to 150 seconds. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] mac-authentication timer server-timeout 150reset mac-authenticationSyntaxreset mac-authentication statistics [ interface interface-list ]ViewUser viewParametersinterface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing this argumentin the form of interface-list = { interface-type interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10> means that you can provide up to 10 port indexes/port index ranges for thisargument.DescriptionUse the reset mac-authentication command to clear the MAC address authentication statistics. Withthe interface keyword specified, the command clears the MAC address authentication statistics of thespecified port. Without this keyword, the command clears the global MAC address authenticationstatistics.Examples# Clear the MAC address authentication statistics for port Ethernet 1/0/1.
