1-9Interface : InLoopBack0 State : ActiveTable 1-7 Description on the fields of the display ipv6 route-table verbose commandField DescriptionDestinations Number of reachable destination networks/hostsRoutes Number of routing entriesDestination Destination network/host IPv6 address.PrefixLength Prefix length of the destination IPv6 addressNextHop Next hop addressProtocol Routing protocol discovering the routeInterface Egress interfaceState Routing entry state: Active (valid route) or Inactive (invalidroute).display ipv6 socketSyntaxdisplay ipv6 socket [ socktype socket-type ] [ task-id socket-id ]ViewAny viewParameterssocket-type: Type of a socket, in the range of 1 to 3. The value “1” represents a TCP socket, “2” a UDPsocket, and “3” a raw IP socket.task-id: ID of a task, in the range of 1 to 100.socket-id: ID of a socket, in the range of 0 to 3072.DescriptionUse the display ipv6 socket command to display information related to a specified socket.With no argument specified, this command displays the information about all the sockets; with only thesocket type specified, the command displays the information about sockets of the specified type; withthe socket type, task ID and socket ID specified, the command displays the information about thespecified socket.Examples# Display information related to a specified socket. display ipv6 socketSOCK_STREAM:Task = VTYD(43), socketid = 1, Proto = 6,LA = ::->23, FA = ::->0,sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,socket option = SO_ACCEPTCONN SO_REUSEADDR SO_KEEPALIVE SO_REUSEPORT SO_SETKEEPALIVE,
