1-13DescriptionUse the port link-type command to configure an Ethernet port as the fabric port. This command hasthe same function with the fabric-port enable command, and is available only in gigabit port view.By default, no port is configured as the fabric port.Note that:After you use the port link-type xrn-fabric command to specify a port as the fabric port, you cannotuse the port link-type command to change the port to a port of other types. You need to use the undofabric-port command first to disable the fabric port function of the port to change the port type.Examples# Set GigabitEthernet 1/0/25 port as a fabric port. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface GigabitEthernet 1/0/25[Sysname-GigabitEthernet1/0/25] port link-type xrn-fabricreset ftm statisticsSyntaxreset ftm statisticsViewUser viewParametersNoneDescriptionUse the reset ftm statistics command to clear FTM statistics. You can use this command together withthe display ftm command to view the packet statistics processed by FTM in a period of time, thusanalyzing fabric operation status and locating problems.Related commands: display ftm.Examples# Clear FTM statistics. reset ftm statisticsset unit nameSyntaxset unit unit-id name unit-nameViewSystem view
