3-9Field RemarksTransceiver info I/O error Transceiver information read and write errorTransceiver info checksum error Transceiver information checksum errorTransceiver type and port configurationmismatch Transceiver type does not match port configuration.Transceiver type not supported by porthardware Transceiver type is not supported on the port.Examples# Display the alarm information of the transceiver on interface GigabitEthernet 1/0/25. display transceiver alarm interface gigabitethernet 1/0/25GigabitEthernet1/0/25 transceiver current alarm information:TX faultTable 3-6 Description on the fields of display transceiver alarm interfaceField Descriptiontransceiver current alarm information Current alarm information of the transceiverTX fault TX faultdisplay transceiver diagnosis interfaceSyntaxdisplay transceiver diagnosis interface [ interface-type interface-number ]ViewAny viewParametersinterface-type interface-number: Interface type and interface number.DescriptionUse the display transceiver diagnosis interface command to display the currently measured value ofdigital diagnosis parameters of a single or all anti-spoofing transceivers customized by H3C.Examples# Display the currently measured value of digital diagnosis parameters of the anti-spoofing pluggableoptical transceiver customized by H3C on interface GigabitEthernet 1/0/25. display transceiver diagnosis interface gigabitethernet 1/0/25GigabitEthernet1/0/25 transceiver diagnostic information:Current diagnostic parameters:Temp(°C) Voltage(V) Bias(mA) RX power(dBM) TX power(dBM)36 3.31 6.13 -35.64 -5.19
