1-49[Sysname-radius-radius1] retry realtime-accounting 10retry stop-accountingSyntaxretry stop-accounting retry-timesundo retry stop-accountingViewRADIUS scheme viewParametersretry-times: Maximum number of transmission attempts of a buffered stop-accounting request, rangingfrom 10 to 65,535.DescriptionUse the retry stop-accounting command to set the maximum number of transmission attempts of astop-accounting request buffered due to no response.Use the undo retry stop-accounting command to restore the default maximum number oftransmission attempts of a buffered stop-accounting request.By default, the maximum number of stop-accounting request transmission attempts is 500.Stop-accounting requests are critical to billing and will eventually affect the charges of users; they areimportant to both users and ISPs. Therefore, the switch should do its best to transmit them to RADIUSaccounting servers. When getting no response to such a request, the switch should first buffer therequest on itself, and then retransmit the request to the RADIUS accounting server until it gets aresponse, or the maximum number of transmission attempts is reached (in this case, it discards therequest).Related commands: reset stop-accounting-buffer, radius scheme, displaystop-accounting-buffer.Examples# In RADIUS scheme radius1, specify that the switch can transmit a buffered stop-accounting requestat most 1000 times system-viewSystem View: return to User View with Ctrl+Z.[Sysname] radius scheme radius1New Radius scheme[Sysname-radius-radius1] retry stop-accounting 1000secondary accountingSyntaxsecondary accounting ip-address [ port-number ]
