1-4Table 1-2 display snmp-agent group command output descriptionField DescriptionGroup name SNMP group name of the userSecurity modelSNMP group security mode, which can beAuthPriv (authentication with privacy),AuthnoPriv (authentication without privacy), andnoAuthnoPriv (no authentication no privacy).Readview Read-only MIB view corresponding to the SNMPgroupWriteview Writable MIB view corresponding to the SNMPgroupNotifyview Notify MIB view in which traps can be sent. Itcorresponds to the SNMP groupstorage-typeStorage type, which can be:z volatile: Information will be lost if the systemis rebootedz nonVolatile: Information will not be lost if thesystem is rebootedz permanent: Modification is permitted, butdeletion is forbiddenz readOnly: Read only, that is, no modification,no deletionz other: Other storage typesdisplay snmp-agent mib-viewSyntaxdisplay snmp-agent mib-view [ exclude | include | viewname view-name ]ViewAny viewParametersexclude: Specifies the SNMP MIB views that are of the excluded type.Include: Specifies the SNMP MIB views that are of the included type.view-name: Name of an SNMP MIB view to be displayed.DescriptionUse the display snmp-agent mib-view command to display the MIB view configuration of the currentEthernet switch, including view name, MIB subtree, subtree mask, and so on.For the description of the configuration items of MIB view, refer to the related description in thesnmp-agent mib-view command.Examples# Display the information about the currently configured MIB view. display snmp-agent mib-view
