2-6ViewSystem viewParametersinterface-type interface-number: Source interface that the switch uses every time it connects to theTFTP server.DescriptionUse the tftp source-interface command to specify the source interface of a TFTP client that the TFTPclient uses every time it connects to a TFTP server. The system prompts that the configuration fails if thespecified interface does not exist.Use the undo tftp source-interface command to cancel the source interface setting. The switch usesthe IP address of the outbound interface in the local routing table as the source IP address to connect toa TFTP server. The destination of the outbound interface is the subnet where the TFTP server residesBy default, no source interface is specified for the switch to connect to the TFTP server.Examples# Specify VLAN-interface 1 as the source interface that the TFTP client uses every time it connects to aTFTP server. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] tftp source-interface Vlan-interface 1tftp source-ipSyntaxtftp source-ip ip-addressundo tftp source-ipViewSystem viewParametersip-address: The source IP address that the switch uses every time it connects to a TFTP server.DescriptionUse the tftp source-ip command to specify the source IP address that a TFTP client uses every time itconnects with a TFTP server. The specified IP address must exist; otherwise, a prompt appears to showthe configuration fails.Use the undo tftp source-ip command to cancel the source IP address setting. The switch uses the IPaddress of the outbound interface in the local routing table as the source IP address to connect to aTFTP server. The destination of the outbound interface is the subnet where the TFTP server resides.By default, no source IP address is specified for the switch to connect to the TFTP server.
