1-106 000f-cbb7-3264 10 Left/ 1 A7 000f-cbb7-2260 10 /Right 1 A8 000f-cbb7-2734 10 Left/ 1 AFrom the above example, you can see the priority of each unit restores to 10 and the numbering modechanges from M (manual numbering) to A (automatic numbering).fabric-port enableSyntaxfabric-port interface-type interface-number enableundo fabric-port interface-type interface-number enableViewSystem viewParametersinterface-type interface-number: Type and port number of a fabric port.z On a Switch 4500-26Port switch, only four GigabitEthernet ports can be configured as fabric ports:GigabitEthernet 1/0/25, GigabitEthernet 1/0/26, GigabitEthernet 1/0/27, and GigabitEthernet1/0/28.z On a Switch 4500-50Port switch, only four GigabitEthernet ports can be configured as fabric ports:GigabitEthernet 1/0/49, GigabitEthernet 1/0/50, GigabitEthernet 1/0/51, and GigabitEthernet1/0/52.DescriptionUse the fabric-port enable command to configure a specified port as a fabric port.Use the undo fabric-port enable command to disable the fabric port function for a port. When the lastfabric port on a switch is disabled, the fabric function is disabled globally.The four ports on a Switch 4500-26Port (Switch 4500-50Port) series Ethernet switch fall into twogroups according to their port numbers:z GigabitEthernet 1/0/25(49) and GigabitEthernet 1/0/26(50) form the first group.z GigabitEthernet 1/0/27(51) and GigabitEthernet 1/0/28(52) form the second group.Only one group of ports can be configured as fabric ports at a time. Given a group, eitherGigabitEthernet 1/0/25(49) or GigabitEthernet 1/0/27(51) can be configured as the left fabric port, andeither GigabitEthernet 1/0/26(50) or GigabitEthernet 1/0/28(52) can be configured as the right fabricport.
