1-30Handshake timer:10 secHandshake hold-time:60 secAdministrator device mac address:000f-e20f-3901Administrator status:UpTable 1-5 Description on the fields of the display cluster commandField DescriptionCluster name Name of the cluster, which can be configuredthrough the build commandRole Role of this switchManagement-vlanNumber of the management VLAN, which can beconfigured through the management-vlancommandMember number Member number of this switchHandshake timer Interval to send handshake packets, which canbe configured through the timer commandHandshake hold-timeHoldtime of the neighbor status information,which can be configured through the holdtimecommandAdministrator device mac address MAC address of the management deviceAdministrator status Status of the management devicedisplay cluster candidatesSyntaxdisplay cluster candidates [ mac-address H-H-H | verbose ]ViewAny viewParametersmac-address H-H-H: Specifies a candidate device by its MAC address. H-H-H represents the MACaddress.verbose: Displays detailed information about candidate devices.DescriptionUse the display cluster candidates command to display information about one specified or allcandidate devices of a cluster.You can only use this command on a management device.Note that, after a cluster is set up on a Switch 4500 series switch, the switch will collect the topologyinformation of the network at the topology collection interval you set and automatically add thecandidate devices it discovers into the cluster. As a result, if the topology collection interval is too short(the default interval is 1 minute), the switches acting as candidate devices will not keep in candidatestate for a long time – they will change to member devices within a short time. If you do not want the
