3-11Table 3-8 Description on the fields of the display transceiver interface commandField Descriptiontransceiver information Transceiver information of the interfaceTransceiver Type Transceiver typeConnector TypeType of the connectors of the transceiver:z Optical connectors, including SC (SCconnector, developed by NTT) and LC (LCconnector, 1.25 mm/RJ45 optical connectordeveloped by Lucent).z Other connectors, including RJ-45 and CX4.Wavelength(nm)z Optical transceiver: central wavelength of thelaser sent, in nm. If the transceiver supportsmultiple wavelengths, every two wavelengthvalues are separated by a comma.z Electrical transceiver: displayed as N/A.Transfer distance(xx)Transfer distance, with xx representing km forsingle-mode transceivers and m for othertransceivers. If the transceiver supports multipletransfer medium, every two values of the transferdistance are separated by a comma. Thecorresponding transfer medium is included in thebracket following the transfer distance value.The following are the transfer media:z 9 um: 9/125 um single-mode fiberz 50 um: 50/125 um multi-mode fiberz 62.5 um: 62.5/125 um multi-mode fiberz TP: Twisted pairz CX4: CX4 cableDigital Diagnostic MonitoringWhether the digital diagnosis function issupported, where:z YES: supportedz NO: not supportedVendor NameVendor name or vendor name specified of thetransceiver:z The anti-spoofing transceiver customized byH3C: H3C is displayed.z Other transceivers: The original vendor nameis displayed.Ordering Name Ordering name of the transceiverdisplay transceiver manuinfo interfaceSyntaxdisplay transceiver manuinfo interface [ interface-type interface-number ]ViewAny viewParametersinterface-type interface-number: Interface type and interface number.
