1-47undo retryViewRADIUS scheme viewParametersretry-times: Maximum number of transmission attempts of a RADIUS request, ranging from 1 to 20.DescriptionUse the retry command to set the maximum number of transmission attempts of a RADIUS request.Use the undo retry command to restore the default maximum number of transmission attempts.By default, the maximum number of RADIUS request transmission attempts is 3.Note that:z The communication in RADIUS is unreliable because this protocol adopts UDP packets to carry itsdata. Therefore, it is necessary for the switch to retransmit a RADIUS request if it gets no responsefrom the RADIUS server after the server response timeout timer expires. If the switch gets noanswer after it has tried the maximum number of times to transmit a RADIUS request, the switchconsiders that the request fails.z Appropriately setting this maximum number of transmission attempts according to your networksituation can improve the reacting speed of the system.Related commands: radius scheme.Examples# Set the maximum number of RADIUS request transmission attempts for RADIUS scheme radius1 tofive. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] radius scheme radius1New Radius scheme[Sysname-radius-radius1] retry 5retry realtime-accountingSyntaxretry realtime-accounting retry-timesundo retry realtime-accountingViewRADIUS scheme view
