3-16After you execute the command, the system will prompt you to confirm. Enter "Y" or "y" for your settingto take effect. Your setting will overwrite the previous one (if available).If you adjust the system time by the clock command after executing the schedule reboot regularitycommand, the configured schedule reboot regularity command will be invalid.Related commands: reboot, schedule reboot at, undo schedule reboot, display schedule reboot.Examples# Schedule a reboot so that the switch reboots at 10:00 every Thursday. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] schedule reboot regularity at 10:00 thursdaySchedule reboot regularity, are you sure?[Y/N]:y[Sysname]system-monitor enableSyntaxsystem-monitor enableundo system-monitor enableViewSystem viewParametersNoneDescriptionUse the system-monitor enable command to enable real-time monitoring of the running status of thesystem.Use the undo system-monitor enable command to disable real-time monitoring of the running statusof the system.This function enables you to dynamically record the system running status, such as CPU, thusfacilitating analysis and solution of the problems of the device.By default, real-time monitoring of the running status of the system is enabled.Enabling of this function consumes some amounts of CPU resources. Therefore, if your network has ahigh CPU usage requirement, you can disable this function to save your CPU resources.Examples# Disable real-time monitoring of the running status of the system. system-view
