1-53[Sysname] radius scheme radius1New Radius scheme[Sysname-radius-radius1] state secondary authentication activestop-accounting-buffer enableSyntaxstop-accounting-buffer enableundo stop-accounting-buffer enableViewRADIUS scheme viewParametersNoneDescriptionUse the stop-accounting-buffer enable command to enable the switch to buffer the stop-accountingrequests that get no response.Use the undo stop-accounting-buffer enable command to disable the switch from buffering thestop-accounting requests that get no response.By default, the switch is enabled to buffer the stop-accounting requests that get no response.Stop-accounting requests are critical to billing and will eventually affect the charges; they are importantto both users and ISPs. Therefore, the switch should do its best to transmit them to RADIUS accountingservers. When getting no response to such a request, the switch should first buffer the request on itself,and then retransmit the request to the RADIUS accounting server until it gets a response, or themaximum number of transmission attempts is reached (in this case, it discards the request).Related commands: reset stop-accounting-buffer, radius scheme, displaystop-accounting-buffer.Examples# In RADIUS scheme radius1, enable the switch to buffer the stop-accounting requests that get noresponse from the servers. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] radius scheme radius1New Radius scheme[Sysname-radius-radius1] stop-accounting-buffer enabletimerSyntaxtimer seconds
