1-12Protocol: #DIRECT Preference: 0*NextHop: 2.2.2.1 Interface: 2.2.2.1(Vlan-interface2)State: Age: 20:08:05 Cost: 0/0For descriptions of route states, see Table 1-2.Table 1-5 lists the statistics of the routing table.Table 1-5 Description on the fields of the display ip routing-table verbose commandField DescriptionHolddown Number of suppressed routesDelete Number of deleted routesHidden Number of hidden routesreset ip routing-table statistics protocolSyntaxreset ip routing-table statistics protocol { all | protocol }ViewUser viewParametersall: Specifies all protocols.protocol: Specifies a protocol, which can be direct, rip, or static.DescriptionUse the reset ip routing-table statistics protocol command to clear the statistics of routes in a routingtable.Examples# Before executing the reset ip routing-table statistics protocol command, use the display iprouting-table statistics command to display the routing statistics: display ip routing-table statisticsRouting tables:Proto route active added deletedDIRECT 4 4 12 8STATIC 0 0 0 0RIP 0 0 0 0Total 4 4 12 8# Clear the routing statistics of all protocols from the IP routing table. reset ip routing-table statistics protocol all# Display the routing statistics in the IP routing table. display ip routing-table statistics
