1-8# Display the summary information about the user interface. display user-interface summaryUser interface type : [AUX]0:XXXX XXXXUser interface type : [VTY]8:UXXX X1 character mode users. (U)12 UI never used. (X)1 total UI in useTable 1-2 display user-interface summary command output descriptionField DescriptionUser interface type User interface type: AUX or VTY0: XXXX XXXX/8:UXXX X0 and 8 represent the least absolute number forAUX user interfaces and VTY user interfaces.“U” and “X” indicate the usage state of aninterface: U indicates that the correspondinguser interface is used; X indicates that thecorresponding user interface is idle. The totalnumber of Us and Xs is the total number of userinterfaces that are available.character mode users. (U) The number of current users, that is, the numberof UsUI never used. (X) The number of user interfaces not being usedcurrently, that is, the number of Xstotal UI in use.The total number of user interfaces being usedcurrently, that is, the total number of userscurrently logging in to the switch successfullydisplay usersSyntaxdisplay users [ all ]ViewAny viewParametersall: Displays the user information about all user interfaces.DescriptionUse the display users command to display the login user information about user interfaces, includingAUX user interfaces and VTY user interfaces.If you do not specify the all keyword, only the user information about the user interface that is beingused is displayed.
