1-6retrySyntaxretry retry-timesundo retryViewDetected group viewParametersretry-times: Maximum retry times during a detect operation. This argument ranges from 0 to 10 anddefaults to 2.DescriptionUse the retry command to set the maximum retry times during a detect operation.Use the undo retry command to restore the default times.By default, the maximum retry times during a detect operation is two.When an Auto Detect-enabled switch detects objects, it sends an ICMP Request to each detectedobject. If the switch fails to receive an ICMP Reply from the object within the time waiting for an ICMPReply configured with the time wait command, the switch re-sends an ICMP Request until themaximum retry times configured with the retry command is reached. If still no ICMP Reply is received,the destination IP address is considered as unreachable.Examples# Specify the maximum number of retires to 3 for detected group 10. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] detect-group 10[Sysname-detect-group-10] retry 3standby detect-groupSyntaxstandby detect-group group-numberundo standby detect-groupViewVLAN interface viewParametersgroup-number: Detected group number ranging from 1 to 25.DescriptionUse the standby detect-group command to configure the interface backup function by using the autodetect function.
