1-17Fabric name is fab, system mode is L3.Fabric authentication : no authentication, number of units in stack: 1.Unit Name Unit IDFirst 1(*)First 2First 8update fabric test.binThis will update the Fabric. Continue? [Y/N] yThe software is verifying ...The result of verification is :Unit ID Free space(bytes) Enough Version comparison1 2126848 Y Y2 2125824 Y Y8 1439744 Y Ywarning: the verification is completed, start the file transmission [Y/N] yThe fabric is being updated, 100%The test.bin is stored on unit 1 successfullyThe test.bin is stored on unit 2 successfullyThe test.bin is stored on unit 8 successfullyDo you want to set test.bin to be running agent next time to boot[Y/N] yThe test.bin is configured successfullyFile Attribute Configuration Commandsboot attribute-switchSyntaxboot attribute-switch { all | app | configuration | web } fabricViewUser viewParametersall: Specifies all the files, including app files, configuration files and Web files.app: Specifies app files.configuration: Specifies configuration files.web: Specifies Web files.fabric: Specifies to apply the configuration to the whole fabric.DescriptionUse the boot attribute-switch command to switch between the main and backup attribute for all thefiles or a specified type of files. That is, change a file with the main attribute to one with the backupattribute, or vice versa.Examples# Switch the attributes of all the files in the fabric. boot attribute-switch all fabric
