3-4habp server vlanSyntaxhabp server vlan vlan-idundo habp serverViewSystem viewParametersvlan-id: VLAN ID, ranging from 1 to 4094.DescriptionUse the habp server vlan command to configure a switch to operate as an HABP server. Thiscommand also specifies the VLAN where HABP packets are broadcast.Use the undo habp server vlan command to revert to the default HABP mode.By default, a switch operates as an HABP client.To specify a switch to operate as an HABP server, you need to enable HABP (using the habp enablecommand) for the switch first. When HABP is not enabled, the habp server vlan command cannot takeeffect.Examples# Specify the switch to operate as an HABP server and the HABP packets to be broadcast in VLAN 2.(Assume that HABP is enabled.) system-viewSystem View: return to User View with Ctrl+Z.[Sysname] habp server vlan 2habp timerSyntaxhabp timer intervalundo habp timerViewSystem viewParametersinterval: Interval (in seconds) to send HABP request packets. This argument ranges from 5 to 600.DescriptionUse the habp timer command to set the interval for a switch to send HABP request packets.Use the undo habp timer command to revert to the default interval.The default interval for a switch to send HABP request packets is 20 seconds.Use these two commands on switches operating as HABP servers only.
