1-6Field DescriptionPort Protocol Indicates whether STP is enabled on the portPort Role Port role, which can be Alternate, Backup, Root, Designated,Master, or DisabledPort Priority Port priorityPort Cost(Legacy)Path cost of the port. The field in the bracket indicates thestandard used for port path cost calculation, which can belegacy, dot1d-1998, or dot1t. Config indicates the configuredvalue, and Active indicates the actual value.Desg. Bridge/PortDesignated bridge ID and port ID of the portThe port ID displayed is insignificant for a port which does notsupport port priority.Port Edged Indicates whether the port is an edge port. Config indicates theconfigured value, and Active indicates the actual value.Point-to-pointIndicates whether the port is connected to a point-to-point link.Config indicates the configured value, and Active indicates theactual value.Transmit Limit The maximum number of packets sent within each Hello timeProtection Type Protection type on the port, including Root guard and LoopguardMST BPDU formatFormat of the MST BPDUs that the port can send, which can belegacy or 802.1s. Config indicates the configured value, andActive indicates the actual value.Port ConfigDigest Snooping Indicates whether digest snooping is enabled on the port.Num of Vlans Mapped Number of VLANs mapped to the current MSTIPortTimesMajor parameters for the port:z Hello: Hello timerz MaxAge: Max Age timerz FwDly: Forward delay timerz MsgAge: Message Age timerz Remain Hop: Remaining hopsBPDU Sent The number of BPDUs sent since MSTP was enabled on thedeviceBPDU Received The number of BPDUs received since MSTP was enabled onthe devicedisplay stp abnormalportSyntaxdisplay stp abnormalportViewAny view
