ABB OmniCore DressPack IRB 5710 Product Manual

Also see for IRB 5710: Product manual

NoteActionProtection hose:Cut the new protection hose to the lengthrequired.NotePlace the cut on top of a ridge. See A in thefigure!2LeanID MH 52 (IRB 5710-70/2.7 LID)3HAC042557-001LeanID MH 70 (IRB 5710-90/2.3 LID)3HAC080953-002Axx0300000061If the hose is to be undivided: cut for acomplete hose: 1,250 mmIf the hose is to be divided in two parts: cutfor the back end: 450 mmCable grease: 3HAC14807-1 (OptitempRB2)Put some cable grease on cables andhoses on the area where they run throughthe protection hose and hose reinforcementfunnel.3Best performed in this order:1 Cables with the biggest connectors2 Cables with the smallest connectors.Push the cables into the protection hose.4Make sure that cables are not twisted.5Clean the cables and hoses from any lub-rication at the mounting points of the cableand hose retainer.6Also clean the retainer, if necessary.CAUTIONNo lubrication is allowed in the cable retain-er. Make sure to clean cables, hoses andthe cable retainer, if necessary.Continues on next pageProduct manual - DressPack IRB 5710 1673HAC082052-001 Revision: D© Copyright 2022-2024 ABB. All rights reserved.5 Repair5.4.2 Replacing the protection hose for LeanID MH cable packageContinued