ABB OmniCore DressPack IRB 5710 Product Manual

Also see for IRB 5710: Product manual

NoteActionTightening torque:• Brass coupling 1/2": 31 Nm.• Stainless steel coupling 1/2": 49 Nm.• Brass coupling 3/8": 17 Nm.• Mixed metals: Use the lower tighten-ing torque value of the two metals.Always apply Molykote P1900 to stainlesssteel couplings and apply if needed forcouplings of mixed metals or brass.Connect the rest of the cable and hoseconnectors to the customer plate and pro-cess plate.Only for Paramulti DressPack: Also con-nect functional ground.CAUTIONDo not tighten the brass couplings for waterand air with excessive force.10Tightening torque, Ethernet M12: 0.6 Nm.CAUTIONIf the M12 Ethernet connector is nottightened correctly, there is a risk that theconnector can loosen and the cable shieldgets disconnected, which will requireretightening with the correct torque tools.For secure connection, always tighten atthe knurled screw with correct torque andby using proper torque tool, e.g. M12 dy-namometric screwdriver SW15 (09 99 0000646 (article number at Harting TechnologyGroup)). xx2300001093Recheck all cables and hoses for strainingor twisting.Reroute if necessary!xx2300001422Route the cables behind the frame asshown in the figure.11Continues on next pageProduct manual - DressPack IRB 5710 693HAC082052-001 Revision: D© Copyright 2022-2024 ABB. All rights reserved.3 Installation3.5.1.2 Fitting the lower arm SW cable packageContinued