ABB OmniCore E10 Product Manual

1 Safety1.1 Safety information1.1.1 Limitation of liabilityLimitation of liabilityAny information given in this manual regarding safety must not be construed as awarranty by ABB that the industrial robot will not cause injury or damage even ifall safety instructions are complied with.The information does not cover how to design, install and operate a robot system,nor does it cover all peripheral equipment that can influence the safety of the robotsystem.In particular, liability cannot be accepted if injury or damage has been caused forany of the following reasons:• Use of the robot in other ways than intended.• Incorrect operation or maintenance.• Operation of the robot when the safety devices are defective, not in theirintended location or in any other way not working.• When instructions for operation and maintenance are not followed.• Non-authorized design modifications of the robot.• Repairs on the robot and its spare parts carried out by in-experienced ornon-qualified personnel.• Foreign objects.• Force majeure.Spare parts and equipmentABB supplies original spare parts and equipment which have been tested andapproved. The installation and/or use of non-original spare parts and equipmentcan negatively affect the safety, function, performance, and structural propertiesof the robot. ABB is not liable for damages caused by the use of non-original spareparts and equipment.Product manual - OmniCore E10 133HAC079399-001 Revision: C© Copyright 2019-2022 ABB. All rights reserved.1 Safety1.1.1 Limitation of liability