ABB OmniCore E10 Product Manual

6.3.2 Troubleshooting the FlexPendantDescriptionThe FlexPendant communicates with the computer and logic unit. The FlexPendantis physically connected to the panel board. The cable contains the +24 V supply,two enabling device chains and emergency stop.ProcedureThe procedure below describes what to do if the FlexPendant does not workcorrectly.NoteActionSee Operating manual - Omni-Core.Try resetting the FlexPendant using the resetbutton located next to the USB port.1NoteIf protective gloves are used, thesemust be compatible with touch-screens when using the FlexPend-ant.If the FlexPendant is not responding or does notoperate correctly, see Problem starting or con-necting the FlexPendant on page 176.2Check the cable for connections and integrity.3Check the 24 V power supply.4Read the error event log message and follow anyinstructions of references.5For more information on the FlexPendant, see Operating manual - OmniCore.Product manual - OmniCore E10 1873HAC079399-001 Revision: C© Copyright 2019-2022 ABB. All rights reserved.6 Troubleshooting6.3.2 Troubleshooting the FlexPendant