ABB OmniCore E10 Product Manual

2.8 ABB AbilityThe OmniCore™ controller hardware is delivered with a standard mobile connection(Cellular data connection), or WIFI modem and/or Ethernet connection2 .Cellular data connectionIf the ABB Ability™ OmniCore™ controller hardware is delivered together with astandard, free of charge (machine-to-machine or M2M) cellular data connection,it will automatically establish a connection to the ABB Ability™ digital platformonce the power switch of the ABB Ability™ OmniCore™ controller hardware hasbeen turned on and has been connected. After the establishment of the connectionthere will be a data flow from the OmniCore™ controller hardware to the ABBAbility™ digital platform.ABB does not warrant or guarantee an available, stable, uninterrupted, andinterference free connection through the standard cellular data connection. Thisis dependent on the availability and quality of the cellular data signal as providedby the telecommunications carrier on the location where the ABB Ability™OmniCore™ hardware is installed. The cellular data connection is to be used solelyin connection with the ABB Ability™ OmniCore™ controller hardware and excludes,without limitation, voice services, web browsing, music downloading and otherservices that are not traditionally considered as machine to machine (M2M), buthuman-oriented telecommunication services.ABB has established and maintains a formal information and cybersecurityprocedures which includes commercially reasonable technical and organizationalmeasures, in order to protect the data against security breaches, accidental orunlawful destruction, loss, alteration, and unauthorized disclosure of, or access tothe data.The cellular data connection is not required for the operation of the hardware andthe connectivity settings can be adjusted and turned off at any given time. Detailedinformation on the mobile connection is further described in the service descriptionthat can be downloaded from the following web location:https://share.library.abb.com/api/v4?cid=9AAC910011&dk=ManualDataABB will not acquire any right, title and interest in the data other than the rightsgranted by Customer to ABB, but ABB will have the right to collect, store, aggregate,analyze or otherwise use the data for (i) providing and maintaining the hardware,services and/or the ABB software to Customer; (ii) prevent-ing, detecting andrepairing problems related to the security and/or the operation of the hardware,the platform, software; (iii) improving and developing existing services, technologies,products and/or software and developing new services, technologies, productsand/or software, and all improvements and developments (including all resultingintellectual property Rights) are exclusively owned by us. In addition, we have theright to use the data for benchmarking purposes if and to the extent it is anonymizedor non-confidential.2 For OmniCore E10, only Ethernet connection is available.Continues on next pageProduct manual - OmniCore E10 453HAC079399-001 Revision: C© Copyright 2019-2022 ABB. All rights reserved.2 Controller description2.8 ABB Ability