ABB OmniCore E10 Product Manual

WeightThe table shows the weight of the controller.WeightController12 kgOmniCore E10NoteThe weight does not include any mounting kits fitted on the controller.Transportation and storage conditionsValueParameter-25°C (-13°F)Minimum ambient temperature+55°C (+131°F)Maximum ambient temperature+70°C (+158°F)Maximum ambient temperature (less than 24hrs)Max. Grms = 4 m/s 2 (X & Y axis), Grms =12.8 m/s 2 (Z axis)VibrationMax. 5 g = 50 m/s 2 (11 ms)BumpsAfter storage, the operating conditions inside the controller must be met for at least6 hours before switching on the controller (see Operating conditions on page 37).The robot controller shall only be stored indoors, in an environment that is dry anddust-free. In addition, wind, temperature fluctuations, and condensation shall beavoided.Operating conditionsThe table shows the allowed operating conditions for the controller.ValueParameter+5°C (+41°F)Minimum ambient temperature+45°C (+113°F)Maximum ambient temperature2,000 mMaximum ambient altitudeMax. Grms = 2.86 m/s 2 (X, Y, Z axis)VibrationMax. 5 g = 50 m/s 2 (11 ms)BumpsNoteThe humidity conditions shall apply with the environmental conditions EN60721-3-3, climatic class 3K3. For temperatures 0-30°C, the relative humiditymust not exceed 85%. For temperatures exceeding 30°C, the absolute humiditymust not exceed 25g/m3 .If the environmental conditions in EN 60721-3-3, climatic class 3K3, are notpossible to meet at the installation site, desiccant bags can be placed inside thecontroller to achieve corresponding conditions. The desiccant bags must bereplaced regularly to maintain approved operating conditions.Continues on next pageProduct manual - OmniCore E10 373HAC079399-001 Revision: C© Copyright 2019-2022 ABB. All rights reserved.2 Controller description2.2 Technical data for OmniCore E10 controllerContinued