ABB OmniCore E10 Product Manual

Overview of this manualAbout this manualThis manual contains instructions for:• mechanical and electrical installation of the controller• maintenance of the controller• mechanical and electrical repair of the controllerUsageThis manual should be used during:• installation and commissioning, from lifting the product to its work site andsecuring it to the foundation, to making it ready for operation• maintenance work• repair work• decommissioning workNoteIt is the responsibility of the integrator to conduct a risk assessment of the finalapplication.It is the responsibility of the integrator to provide safety and user guides for therobot system.Who should read this manual?This manual is intended for:• installation personnel• maintenance personnel• repair personnel.PrerequisitesA maintenance/repair/installation craftsman working with an ABB robot must:• be trained by ABB and have the required knowledge of mechanical andelectrical installation/repair/maintenance work.• be trained to respond to emergencies or abnormal situations.Product manual scopeThe manual covers all variants and designs of the OmniCore E10. Some variantsand designs may have been removed from the business offer and are no longeravailable for purchase.ReferencesDocument IDDocument name3HAC079823-001Product specification - OmniCore E line3HAC076810-008Circuit diagram - OmniCore E10Continues on next pageProduct manual - OmniCore E10 93HAC079399-001 Revision: C© Copyright 2019-2022 ABB. All rights reserved.Overview of this manual