ABB OmniCore E10 Product Manual

1.2 Safety signals and symbols1.2.1 Safety signals in the manualIntroduction to safety signalsThis section specifies all safety signals used in the user manuals. Each signalconsists of:• A caption specifying the hazard level (DANGER, WARNING, or CAUTION)and the type of hazard.• Instruction about how to reduce the hazard to an acceptable level.• A brief description of remaining hazards, if not adequately reduced.Hazard levelsThe table below defines the captions specifying the hazard levels used throughoutthis manual.SignificanceDesignationSymbolSignal word used to indicate an imminently hazard-ous situation which, if not avoided, will result in ser-ious injury.DANGERSignal word used to indicate a potentially hazardoussituation which, if not avoided, could result in seriousinjury.WARNINGSignal word used to indicate a potentially hazardoussituation related to electrical hazards which, if notavoided, could result in serious injury.ELECTRICALSHOCKSignal word used to indicate a potentially hazardoussituation which, if not avoided, could result in slightinjury.CAUTIONSignal word used to indicate a potentially hazardoussituation which, if not avoided, could result in severedamage to the product.ELECTROSTATICDISCHARGE (ESD)Signal word used to indicate important facts andconditions.NOTEContinues on next page16 Product manual - OmniCore E103HAC079399-001 Revision: C© Copyright 2019-2022 ABB. All rights reserved.1 Safety1.2.1 Safety signals in the manual