20.11 Product information PRODINF20.11.1 FunctionalityThe Product identifiers function contains constant data (i.e. not possible to change)that uniquely identifies the IED:• ProductVer• ProductDef• FirmwareVer• SerialNo• OrderingNo• ProductionDate• IEDProdTypeThe settings are visible on the local HMI , under Main menu/Diagnostics/IEDstatus/Product identifiers and under Main menu/Diagnostics/IED Status/IEDidentifiersThis information is very helpful when interacting with ABB product support (e.g.during repair and maintenance).20.11.2 SettingsThe function does not have any parameters available in the local HMI or PCM600.20.11.3 Factory defined settingsThe factory defined settings are very useful for identifying a specific version and veryhelpful in the case of maintenance, repair, interchanging IEDs between differentSubstation Automation Systems and upgrading. The factory made settings can not bechanged by the customer. They can only be viewed. The settings are found in the localHMI under Main menu/Diagnostics/IED status/Product identifiersThe following identifiers are available:• IEDProdType• Describes the type of the IED (like REL, REC or RET). Example: REL670• ProductDef• Describes the release number, from the production. Example: 1.2.2.0• ProductVer• Describes the product version. Example: 1.2.31 is the Major version of the manufactured product this means, new platform of theproduct1MRK502052-UEN B Section 20Basic IED functions1123Technical manual
