Name Type Default DescriptionBI4 BOOLEAN 0 SMT Connect inputBI5 BOOLEAN 0 SMT Connect inputBI6 BOOLEAN 0 SMT Connect inputBI7 BOOLEAN 0 SMT Connect inputBI8 BOOLEAN 0 SMT Connect inputBI9 BOOLEAN 0 SMT Connect inputBI10 BOOLEAN 0 SMT Connect inputTable 855:SMBI Output signalsName Type DescriptionBI1 BOOLEAN Binary input 1BI2 BOOLEAN Binary input 2BI3 BOOLEAN Binary input 3BI4 BOOLEAN Binary input 4BI5 BOOLEAN Binary input 5BI6 BOOLEAN Binary input 6BI7 BOOLEAN Binary input 7BI8 BOOLEAN Binary input 8BI9 BOOLEAN Binary input 9BI10 BOOLEAN Binary input 1020.12.4 Operation principleThe Signal matrix for binary inputs (SMBI) function , see figure 509, receives itsinputs from the real (hardware) binary inputs via the Signal Matrix Tool (SMT) orACT, and makes them available to the rest of the configuration via its outputs, BI1 toBI10. The inputs and outputs, as well as the whole block, can be given a user definedname. These names will be represented in SMT as information which signals shall beconnected between physical IO and SMBI function. The input/output user definedname will also appear on the respective output/input signal.20.13 Signal matrix for binary outputs SMBO20.13.1 FunctionalityThe Signal matrix for binary outputs (SMBO) function is used within the ApplicationConfiguration Tool (ACT) in direct relation with the Signal Matrix Tool (SMT), see1MRK502052-UEN B Section 20Basic IED functions1125Technical manual
