Name Type Values (Range) Unit DescriptionBO23 BOOLEAN 0=Normal1=Forced2=Blocked- Binary output 23 statusBO24VALUE BOOLEAN 1=10=0- Binary output 24 valueBO24FORCE BOOLEAN 0=Normal1=Forced- nary output 24 forceBO24 BOOLEAN 0=Normal1=Forced2=Blocked- Binary output 24 status21.2.8.6 Technical dataTable 899:BOM - Binary output module contact data (reference standard: IEC 61810-2)Function or quantity Trip and Signal relaysBinary outputs 24Max system voltage 250 V AC, DCTest voltage across open contact, 1 min 1000 V rmsCurrent carrying capacityPer relay, continuousPer relay, 1 sPer process connector pin, continuous8 A10 A12 AMaking capacity at inductive load with L/R>10 ms0.2 s1.0 s30 A10 ABreaking capacity for AC, cos j>0.4 250 V/8.0 ABreaking capacity for DC with L/R < 40 ms 48 V/1 A110 V/0.4 A125 V/0.35 A220 V/0.2 A250 V/0.15 AMaximum 72 outputs may be activated simultaneously. After 6 ms anadditional 24 outputs may be activated. The activation time for the 96outputs must not exceed 200 ms. 48 outputs can be activated during 1s. Continued activation is possible with respect to currentconsumption but after 5 minutes the temperature rise will adverselyaffect the hardware life. Maximum two relays per BOM/IOM shouldbe activated continuously due to power dissipation.Section 21 1MRK502052-UEN BIED hardware1168Technical manual
