Table 129:ROTIPHIZ Non group settings (basic)Name Values (Range) Unit Step Default Descriptionk1Real -10000000000.000- 10000000000.000- 0.001 10000.000 Multiplication factor k1 for calibration, realpartk1Imag -10000000000.000- 10000000000.000- 0.001 0.000 Multiplication factor k1 for calibration,imaginary partk2Real -10000000000.000- 10000000000.000Ohm 0.001 0.000 Addition factor k2 for calibration, real partin Ohmk2Imag -10000000000.000- 10000000000.000Ohm 0.001 0.000 Addition factor k2 for calibration,imaginary part in OhmRefR1 0.001 -1000000000.000Ohm 0.001 1000000.000 Reference resistance R1 in ohmRefX1 -1000000.000 -1000000.000Ohm 0.001 2000.000 Reference reactance X1 in ohmRefR2 0.001 -1000000000.000Ohm 0.001 1000000.000 Reference resistance R2 in ohmRefX2 -1000000.000 -1000000.000Ohm 0.001 2000.000 Reference reactance X2 in ohmTable 130:ROTIPHIZ Non group settings (advanced)Name Values (Range) Unit Step Default DescriptionFilterLength 1 s2 s- - 1 s Length of filter buffer7.8.8 Monitored dataTable 131:ROTIPHIZ Monitored dataName Type Values (Range) Unit DescriptionRAVE REAL - Ohm Measured resistance toearth in Ohm at inj freqXAVE REAL - Ohm Measured reactance toearth in Ohm at inj freqFREQU REAL - Hz Measured frequency ofinjected voltage into rotorRFAULT REAL - Ohm Estimated faultresistance in OhmZREF INTEGER - - Selected referenceimpedance numberZREFRE REAL - Ohm Used referenceimpedance real part inOhmZREFIM REAL - Ohm Used referenceimpedance imaginarypart in OhmURMSSTAT BOOLEAN - - RMS voltage status,TRUE when > ULimRMSSection 7 1MRK502052-UEN BImpedance protection284Technical manual
