22.1.1.4 Shunt resistor unit REX062X1IEC11000038-1-en.vsdIEC11000038 V1 ENFigure 566: Shunt resistor unit REX062217 [8,54]255 [10]235 [9,25]84 [3,3] 84 [3,3]Ø 5,5 [0,22]223 [8,78]2 [0,079]155 [6,1]199 [7,83]38 [1,5]IEC11000039-2-en.vsdIEC11000039 V2 ENFigure 567: REX062 measures and drilling planREX062 shall be mounted close to the IED. It is recommended that REX060 andREX062 are mounted in the same cubicle as the IED.The surface of REX061 unit may be temporarily very hot due to heatdissipation, up to about 65° C above the ambient temperature. It must1MRK502052-UEN B Section 22Injection equipment hardware1225Technical manual
