Use only the screws included in the mounting kit when mounting theplates and the angles on the IED. Screws with wrong dimension maydamage the PCBs inside the IED.Please contact factory for special add on plates for mounting FTswitches on the side (for 1/2 19" case) or bottom of the relay.21.4.5.2 Mounting procedure for side-by-side flush mounting1 234IEC06000181-2-en.vsdIEC06000181 V2 ENFigure 562: Side-by-side flush mounting details (RHGS6 side-by-side with 1/2 x19” IED).The required torque for the screws is 3.5 Nm.PosNo Description Quantity Type1 Mounting plate 2 -2, 3 Screw, washer 16 M4x64 Mounting angle 2 -Section 21 1MRK502052-UEN BIED hardware1214Technical manual
