Chapter 88-84F-8-283- Left Deck Pickup AssemblyF-8-2843) Detach the separation roller [1] from the separation roller shaftsupport.- Right Deck/ Cassette Pickup Assembly3,4F-8-285- Left Deck Pickup AssemblyF-8-286The urethane sponge used in the part is pink at the beginning, andchanges to yellow over time (accelerated if exposed to light; it mayappear to change to orange before turning pink). This is a commoncharacteristic of urethane sponge, and does not indicate physicaldeterioration (performance). In addition, note that the part is notclassified by color.F-8-2878.10.28.4 Orientation of the Separation Roller0009-5116When replacing the separation roller, be sure it is oriented as follows:Mounting the separation roller in the wrong orientation will lead tointerference against crimping washer. Make sure it is mounted in thecorrect orientation.F-8-288F-8-2898.10.28.5 Adjusting the Pressure of the Separation Rollerof the Deck/Cassette0009-5525If double feeding or pickup failure occurs during pickup, change theposition of the pressure spring of the separation roller:- If double feeding occurs, move the hook of the spring in the directionof B.- If pickup failure occurs, move the hook of the spring in the direction ofA.[1] [1][2][3][2][1][1]urethane spongeWider grooveNarrower groove(front of machine)(rear of machine)Wider grooveNarrow groove
