Chapter 1515-14T-15-5YY Description Remedy*101 An ongoing write operationis interrupted (at start-up).1. Set '0' to CHK-TYPE, and execute HD-CHECK; then, turn offand then back on the power.2. Type in CHK-TYPE that corresponds to the partition in question,and execute HD-CLEAR; then, turn off and then back on the power.*21. Ask the user to download the address book data using a remoteUI.2. Set '0' to CHK-TYPE, and execute HD-CHECK; thereafter, turnoff and then on the power.3. Start download mode, and execute full formatting using the SST;thereafter, turn off and then back on the power.*3The recovery operation for the boot partition necessarily requiresthe use of the SST in safe mode.1. Set '0' for CHK-TYPE, and execute HD-CHECK; thereafter, turnoff and then back on the power.2. Start download mode, and execute full formatting and re-installthe system software; thereafter, turn off and then back on the power.*41. Set '0' to CHK-TYPE, and execute HD-CHECK; then, turn offand then back on the power.2. Execute HD-CLEAR by setting '1', '2', '3', and '5' to CHK-type;then, turn off and then back on the power.*502 A file system error hasoccurred.1. Type in CHK-TYPE corresponding to the partition in question,and execute HD-CLEAR; then, turn off and then back on the power.2. Replace the HDD, and re-install the system software.*6The machine does not permit execution of HD-CLEAR in servicemode (to prevent loss of partition information such as address bookand filter data).1. Ask the user to download the address book data using a remoteUI.2. Start download mode from service mode; then, execute fullformatting usingthe SST, and re-install the system software. Thereafter, turn off andthen back on the power.*71. Execute HD-CLEAR by setting "1', '2', '3', and '5' to CHK-TYPE;then, turn off and then back on the power.2. Replace the HDD, and re-install the system software.*8Recovery operation for the Boot partition necessarily requires theuse of the SST in safe mode.1. Start in safe mode, and execute full formatting in the SST, andre-install the system software. Thereafter, turn off and then on thepower.2. Replace the HDD, and re-install the system software.*9 03There is poor contact for theHDD, or there is a systemerror.1. Check the cables and power cord for disconnection.2. Start up in safe mode; then, execute full formatting using theSST, and re-install the system software. Thereafter, turn off andthen back on the power.3. Replace the HDD, and re-install the system software.*10 1121There is poor connection ofthe HDD.1. Check the cable and the power connectors for disconnection.2. Replace the HDD, and re-install the system software.*11 1325A write operation has beensuspended.File data as of Box on the HDD may be damaged.1. Set '0' for CHK-TYPE, and execute HD-CHECK; then, turn offand then back on the power.2. Set '1' for CHK-TYPE, and execute HD-CLEAR.(In the case of APL_SEND or BOOTDEV, reformat using the SSTand re-install the system software.)3. Replace the HDD, and re-install the system software.*12101214222324There is a system error or apacket data error.1. Start up in safe mode; then, execute full formatting using theSST, and re-install the system software. Thereafter, turn off andthen back on the power.2. Replace the HDD, and re-install the system software.
