Chapter 1616-5816.6.2 FEEDER16.6.2.1 FEEDER List0009-6359T-16-5916.6.3 SORTER16.6.3.1 SORTER List0009-6361T-16-6016.6.4 BOARD16.6.4.1 BOARD List0009-6268T-16-61COPIER > FEEDER > OPTIONSub-item Description LevelSIZE-SW Use it to enable detection of a mix of AB and inch originals.setting0: ON (do not detect; default); 1: OFF (detect)1LS-DBL Use it to enable/disable ADF high-speed duplex mode.setting0: enable (execute high-speed duplex mode; normal mode; default)1: disable (do not execute high-speed duplex mode; low-speed duplexmode)1STAMP-SW Use it to indicate the presence/absence of a stamp. (If fitted, set '1' forSTAMP-SW).setting0: stamp absent1: stamp present (default)1COPIER > SORTER > OPTIONSub-item Description LevelBLNK-SW Use it to set the margin width on both sides of a crease when the saddlestitcher is in use.setting0: normal width (5 mm)1: extra width (10 mm; default)1MD-SPRTN Use it to enable/disable accessory-independent mode in the event of afinisher error.setting0: normal (disable accessory-independent mode; default)1: enable (do not staple or align)1COPIER > BOARD > OPTIONSub-item Description LevelFONTDL Use it to enable/disable display of the setting screen for font service when thePS kanji font downloaded is in use.setting0: disable (do not display; default)1: enable (display)1MENU-1 to 4 Use it to enable/disable display of levels 1 thorough 4 for the printer settingsmenu.setting0: disable (do not display; default)1: enable (display)2
