Chapter 99-59.2 Basic Sequence9.2.1 Outline0009-1226T-9-49.2.2 30-Sec Start-Up Mode0009-1230When all the following conditions exist:-Å@the environment temperature is 17 deg C or higher.-Å@the site is a low-humidity environment (absolute moisture content is 13 g or less)-Å@the temperature of the fixing roller is 70 deg C or lessThe target temperature of the fixing roller is 205 deg C.However, the machine shifts to standby mode regardless of whether the temperature of the fixing roller reaches the target or not when 29.5 sec passes afterpower-on.State Sequence DescriptionAt power-on 30-sec start-up mode When all the following conditions exist:- the environment temperature is 17 deg C or higher- the site is a low-humidity environment- the temperature of the fixing roller is 70 deg C or lowerLow-temperature start-upmodeWhen all the following conditions exist:- the site is a high-humidity environment- the temperature of the fixing roller is 70 deg C or lowerHigh humidity environmentstart-up modeThis mode is used when all the following conditions exist:- the site is in a high humidity environment.- the temperature of the fixing roller is 70 deg C or lower.Recovery mode The temperature of the fixing roller is 70 deg C or higher.In wait Standby mode To limit power consumption, the target temperature isdecreased at specific time intervals after the end of start-up.Power save mode To limit power consumption, the target temperature isdecreased.Sleep mode To limit power consumption, the target temperature isdecreased at specific time intervals after the end of start-up.In normal use Copier/printer mode To limit power consumption, the target temperature isdecreased at specific time intervals after the end of start-up.Down sequence NoneSpecial mode Fixing enhancement mode To enhance fixing, the machine changes the start-up sequenceand the control temperature.Heavy paper mode To ensure fixing on heavy paper, the machine changes thetarget temperature and copying/printing speed.Transparency mode To ensure fixing on transparencies, the target temperature isincreased.Bond paper mode To ensure fixing for bond paper, machine increases the targettemperature in a low-temperature environment whiledecreasing the copying/printing speed.
