Chapter 1616-28T-16-28T-16-2916.4.2 FEEDER16.4.2.1 FEEDER List0009-6358T-16-30RG-MFUse it to adjust the registration for manual pickup.adjustment range: -50 to 50 1COPIER > ADJUST > CST-ADJSub-item Description LevelC3-STMTR Use it to enter the paper width basic value for cassette 3 (STMTR).adjustment range: 0 to 255 1C3-A4R Use it to enter the paper width basic value for cassette 3 (A4R).adjustment range: 0 to 255 1C4-STMTR Use it to enter the paper width basic value for cassette 4 (STMTR).adjustment range: 0 to 255 1C4-A4R Use it to enter the paper width basic value for cassette 4 (A4R).adjustment range: 0 to 255 1MF-A4R Use it to enter the paper width basic value for the manual feed tray (A4R).adjustment range: 0 to 255 1MF-A6R Use it to enter the paper width basic value for the manual feed tray (A6R).adjustment range: 0 to 255 1MF-A4 Use it to enter the paper width basic value for the manual feed tray (A4).adjustment range: 0 to 255 1C3-LVOL Use it to enter the capacity of the cassette 3 (50 sheets).adjustment range: 0 to 255 1C3-HVOL Use it to enter the capacity of the cassette 3 (275 sheets).adjustment range: 0 to 255 1C4-LVOL Use it to enter the capacity of the cassette 4 (50 sheets).adjustment range: 0 to 255 1C4-HVOL Use it to adjust the capacity of the cassette 4 (275 sheets).adjustment range: 0 to 255 1COPIER > ADJUST > MISCSub-item Description LevelATM Use it to make settings related to the atmospheric pressure of the site ofinstallation.settings range: 0 to 2 (default: 0)0: 1 to 0.75 atm (up to elevation of 2500 m)1: 0.75 to 0.70 atm (elevation between 2500 and 300 m)2: 0.70 to 0.65 atm (elevation between 300 and 3500 m)1COPIER > FEEDER > ADJUSTSub-item Description LevelDOCST Use it to adjust the original image leading edge position.- a higher setting will delay the timing for the image leading edge.adjustment range: -50 to 50 (unit: 0.1 mm)1LA-SPEED Use it to adjust the original feed speed in feeder stream reading mode.- a higher setting will increase the speed (i.e., contracts the image).adjustment range: -30 to 30 (unit: 0.1%)1COPIER > ADJUST > FEED-ADJSub-item Description Level
