Chapter 1616-3816.5.2 FEEDER16.5.2.1 FEEDER List0009-6356T-16-50HD-CHECK Use it to check and recover the partition you have selected using CHK-TYPE.procedure1) Select the item.2) Press the OK key.3) See the result. (1: OK; 2: NG (hardware); 3: NG (software) (recoverysector/substitute sector also indicated))1HD-CLEAR Use it to initialize the partition you have selected using CHK-TYPE.Procedure1) Select the item.2) Press the OK key.1COPIER > FEEDER > FUNCTIONSub-item Description LevelSENS-INT Use it to adjust the sensitivity of individual sensors of the ADF.Be sure to clean the sensor area before executing the item.Procedure1) Select the item, and press the OK key.2) See that the execution ends automatically.1MTR-CHK Use it to check the ADF motor on its own.Procedure1) Press MTR-CHK to highlight.2) Type in the appropriate motor number using the keypad.3) Press the OK key.4) Press MTR-on to start the check.Motor Number0: pickup motor1: feed motor1TRY-A4 Use it to execute automatic adjustment of paper width detection referencepoint 1 of the ADF original pickup tray. (A4) 1TRY-A5R Use it to execute automatic adjustment of paper width detection referenceprint 2 of the ADF original pickup tray. (A5R) 1TRY-LTR Use it to execute automatic adjustment of paper width detection referencepoint 1 of the ADF original pickup tray. (LTR) 1TRY-LTRR Use it to execute automatic adjustment of paper width detection referencepoint 2 of the ADF original pickup tray. (LTRR) 1FEED-CHK Use it to check paper movement in the ADF on its own.Procedure1) Press FEED-CHK to highlight.2) Type in the appropriate paper feed mode using the keypad.3) Press the OK key.4) Press FEED-on to check the operation.Paper Feed Mode Number0: simplex pickup delivery1: duplex pickup delivery operation2: simplex pickup delivery operation (w/ stamp)3: duplex pickup delivery operation (w/ stamp)1CL-CHK Use it to check the ADF clutch on its own.Procedure1) Press CL-CHK to highlight.2) Type in the appropriate clutch number.3) Press the OK key.4) Press CL-on to check the operation.Clutch Number0: pickup clutch1CL-ON Use it to start the operation of the clutch.Procedure1) Press CL-on and then the OK key to start the operation of the clutch.2) Press the OK key once again to stop the operation. (The operation willstop automatically in about 2 sec; however, the indication will not changeto 'STOP' unless you press the OK key.)1COPIER > FUNCTION > SYSTEMSub-item Description Level
