Chapter 99-449.5.21 Delivery Flapper Solenoid9.5.21.1 Removing the Delivery Flapper Solenoid (SL5)0009-48751) Remove the fixing feeding unit from the machine.2) Remove the outside delivery roller.3) Remove the sensor support plate (outside delivery sensor/deliveryassembly jam sensor) [1].4) Disconnect the connector [1], and remove the 2 screws [2]; then, slidethe delivery flapper solenoid [3] to the side to detach.F-9-1389.5.21.2 Points to Note when Mounting the DeliveryFlapper Solenoid (SL5)0009-4961- When mounting the delivery flapper solenoid, be sure to pay attentionto the spatial relationship between the arm [1] of the delivery flappersolenoid and the arm [2] of the sensor.F-9-1399.5.22 Fixing Cleaning Web Solenoid9.5.22.1 Removing the Fixing Web Solenoid (SL9)0009-48801) Slide out the fixing feeding unit.2) While pushing the hook shaft [1] found at the rear of the fixingfeeding unit in the direction of the arrow (i.e., toward the front of themachine), turn the fixing feeding unit releasing lever [2] clockwise tolock it in place.F-9-1403) Remove the screw [1], and detach the knob [2]; then, remove thescrew, and detach the fixing feeding unit releasing lever [4].F-9-1414) Remove the 2 screws [1], and detach the fixing front cover [2].F-9-1425) Remove the 2 screws [1], and detach the fixing feeding unit front[1][2][3][2][1][1][2][3][4][1][2]
