Chapter 1616-146KEY Recognize the control key function.0: Do not recognize the control key function.[Factory setting value / Value after RAM L: 0]1: Recognize the control key function.1) Select COPIER > INSTAL L> KEY and enter "1".2) Turn OFF/ON the main power switch. (The control key function is recognized.)1INISET-Y/M/C Initial installation of the Y/M/C color developerSimultaneously execute a series of operation required for initial installation of the Y/M/C colordeveloper.The settings executed by this mode are shown below.- Electric potential control- Primary transfer ATVC- Development idling (adjustment of the charging volume of the developer)- Correction of the optical volume of the patch detection sensor (adjustment of the optical volumeof the patch detection sensor)- Transfer cleaning ACVC (determination of high pressure of the transfer cleaning upstream/downstream brush)- Optical ATR initial setting (initial setting of noncontact optical ATR)- Initial setting of patch electric potential control (initial setting of patch electric potential)- Initial setting of patch detection (initial setting of patch detection ATR)1AINR-OFF Make a setting to invalidate the initial multiple rotations for initial installation.This is a mode to make a setting to invalidate the initial multiple rotations for initial installation.This mode is executed so that the image formation sequence does not operate by a patch or Dmax/Dhalf in the initial multiple rotation sequence before initial installation is performed and does notdamage and wear the inside of the machine. When the initial setting for color toner(FUNCTION>INSTALL>INISET-4) is normally completed, the invalidation of initial multiplerotations is automatically released. (This prevents a failure to turn the switch back to the originalposition.) When the initial setting is not completed, the invalidation is not released.Setting range0: Initial multiple rotations are valid.1: Initial multiple rotations are invalid.This is an item to control Dcon.[Factory setting value / Value after RAM L: 0]1E-RDS Make a setting for switching the use of E-RDS.Set if using E-RDS (Embedded-RDS) to send device information of a device counter, failure, orconsumables to a sales company's server via SOAP protocol, or not.Setting value0: Do not use E-RDS.1: Use E-RDS.[Factory setting value / Value after RAM L: 0]1RGW-PORT Specify a port number for a sales company's server used for E-RDS.Setting range: 1 to 65535[Factory setting value / Value after RAM L: 443]1COM-TEST Check the connection to a sales company's server used for E-RDS.Try to connect to the sales company's server. A judgment is made whether the connection hassucceeded or not, and the result is displayed as OK or NG.ResultOK: Connection is possible.NG: Connection is not possible.1COM-LOG Display the details of the communication test result with a sales company's server used for E-RDS.The screen is switched to the one displaying information of the error that has occurred inconnection to a sales company's server. The error occurrence date, time, error code, and errorinformation are displayed.The maximum number of logs: 30Error information: 128 characters max. (NULL is not included.)1RGW-ADR Specify a URL for a sales company's server used for E-RDS.[Factory setting value / Value after RAM L: https://a01.ugwdevice.net/ugw/agentif010] 1INISET-4 Automatic initial setting mode for installation of the main unitSimultaneously execute a series of operation required for initial installation of each colordeveloper.Since there are many working items required for initial installation of a color developer, this modeis provided to minimize a mistake by a serviceman or improve his/her work efficiency.The settings executed by this mode are shown below.- Electric potential control- Primary transfer ATVC- Development idling (adjustment of the charging volume of the developer)- Correction of the optical volume of the patch detection sensor (adjustment of the optical volumeof the patch detection sensor)- Transfer cleaning ACVC (determination of high pressure of the transfer cleaning upstream/downstream brush)- Optical ATR initial setting (initial setting of noncontact optical ATR)- Initial setting of patch electric potential control (initial setting of patch electric potential)- Initial setting of patch detection (initial setting of patch detection ATR1INISET-K Initial installation of the k-color developerSimultaneously execute a series of operation required for initial installation of the k-colordeveloper.Operation method1) Select an item to highlight it and press the OK key.- Start the operation.- Execute countdown.2) After the operation completes, OK is displayed.1STIR-L Execution of stirring of the developer in the developing unit (L color) 1STIR-5 Execution of stirring of the developer in the developing unit (5 colors) 1COPIER > FUNCTION > INSTALLSubheading Contents Level
