Chapter 1616-215SSH-SW Set whether or not to activate the SSH server.Make this setting to specify whether or not to activate the SSH server when activating the mainunit.2Setting range0: Do not activate the SSH server when activating the main unit.1: Activate the SSH server when activating the main unit.Standard value0SSH server does not start by changing the setting value to 1(ON) while activating the main unit.The setting value becomes available after turning the power switch OFF/ON.ReferenceSSH is the abbreviation of 'Secure Shell'. The communication between digital accessory (DA) andiR device is encrypted to avoid being read from the outside.RMT-LGIN Set whether or not to permit remote login to the SSH server.Make this setting to specify whether or not to permit remote login from the remote host (SSHclient: digital accessory) to the SSH server debug console.2Setting range0: Do not permit remote login to the SSH server.1: Permit remote login to the SSH server.Standard value0This item becomes available only when the setting value of is '1(ON)'.RE-PKEY Set whether or not to recreate the SSH server pair keys.Make this setting to specify whether or not to recreate the SSH server pair keys when activatingthe main unit.2Setting range0: Do not recreate the SSH server pair keys when activating the main unit.1: Recreate the SSH server pair keys when activating the main unit.Standard value0This item becomes available only when the setting value of is '1(ON)'.ReferenceIn the case that the main item is set to '1(recreate)', SSH server host recreates the pair keys(confidential/disclosure key) during task activation (power OFF/ON), and implements the outputto key file and storage into HDD. Encryption algorithm (DSA) and the length of key (512bit) arefixed.It may take about three to four minutes more than usual to start the copier body due to thisprocedure.COPIER>OPTION>BODYSubheading Contents Level
